Silicone Rubber Heater for Drain Pipe
Description
After the air cooler operates for some time, its blade will freeze, at the time, the antifreezing heating wire can be used for defrosting to let molten water discharge out of the refrigerator through the drain pipe.
As the front end of the drain pipe is installed in the refrigerator, defrosted water is frozen under 0 C to block the drain pipe, and heating wire is needed to install to ensure that defrosted water doesn't freeze in the drain pipe. The heating wire is installed in the drain pipe to defrost and heat the pipe at the same time to let water exhaust smoothly.
Characteristics
1. Complete water-proof design
2. Double-layer insulator
3. Mould pressing knot, flexibility
4. Silicone rubber insulator applicable scope: -60 C to +200 C
Parameters
| Heating Body |
NiCr or Cu-Ni Alloy |
Length/M |
40W/M |
50W/M |
| Tail End of Heating Body |
Seal Tail End of Colloidal Silica |
1 |
40W |
50W |
| Maximum Surface Temperature |
200 C |
1.3 |
52W |
65W |
| Minimum Surface Temperature |
-60 C |
1.5 |
60W |
75W |
| Immergence Withstand Voltage |
AC2500V V/min |
2.0 |
80W |
100W |
| Voltage |
220-230V |
Shape |
Average7*5mm |
3.0 |
120W |
150W |
| Power |
± Five per cent |
Output Power |
40_50W/M |
4.0 |
160W |
200W |
| Tape Body Length |
±5mm |
Insulation Resistance |
≥200MN |
5.0 |
200W |
250W |
| Tolerance |
± Ten per cent |
Leaking Current |
≤0.2MA |
6.0 |
240W |
300W |
Company
Certification
Packing and Delivery
Packaging
1) plastic bag + carton box
2) wooden box
Delivery
By express (sample order) or by sea(bulk order)
Audited Supplier 
){kind=link}
){kind=link}